NXT+ range of PCUs is the ideal solution for off-grid applications. Designed to offer control, the PCU intelligently optimizes battery charging and power to load among Solar, Battery and Grid power.

MPPT Charge Controller

Our solar PCU has latest MPPT&sbquo; (Maximum Power Point Tracking) charge controller. It enables you to extract maximum from solar power. It is 30% more efficient than a normal PWM based PCUs.

Priority Setting

Being a bi - directional PCU it allows customers flexibility to set the priority setting based on their requirement of maximum energy saving, power backup only during power cut and power backup through battery in areas where grid supply is not available.

Super Informative User friendly LCD

A user friendly LCD that displays important information like battery time of charge &amp; discharge, Grid Off / available, Priority setting etc.

Safe for your home

Luminous Solar PCU is armed with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge. Its pure sine wave output ensures safety and noiseless operation of connected appliances.

MNRE &amp; IEC compliance

Solar PCU complies with all the National &amp; International standards for safety and efficiency and reliability

Luminous NXT 7.5 kW/120V Solar PCU

<ul>
	<li>Charging Current: 20 Amp</li>
	<li>Battery Voltage: 12V/24V (Auto Selection)</li>
	<li>Maximum supported panel: 400Wp(12V), 800Wp(24V)</li>
</ul>

Luminous 1220 Solar Charge controller

Solar Retrofit is an upgrade of Charge controllers which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS. It has inbuilt intelligence to maximise use of solar energy to power your appliances.

<ul>
	<li>Solar Optimization Technique</li>
</ul>

Luminous Solar Retrofit uses the Solar Optimization technique to extract minimum power from the mains and instead use solar energy to the maximum, for example if the battery is charged by only 70% till dusk the Solar Retrofit after analyzing the usage pattern will not charge the battery through the mains but will wait until dawn to do so, hence saving the electricity bill and optimizing the use of ecofriendly solar energy.

<ul>
	<li>LCD Display</li>
</ul>

A user friendly LCD that displays important information like battery Charging Status, Charging Source, Total units savings etc.

<ul>
	<li>MCB Protection</li>
</ul>

World class MCB ensures your UPS and connected loads stay protected from short circuits.

<ul>
	<li>Four Stage Charging</li>
</ul>

The Solar Retrofit supports 4-stage smart charging to ensure fast, safe &amp; efficient charging and longer battery life.

Luminous Shine 4850 Solar Charge Controller

Products:&nbsp; &nbsp; Retrofits and Charge Controllers 
Colour:&nbsp; &nbsp; Blue 
Material:&nbsp; &nbsp; Plastic 
Max DC Output Current (Amp.):&nbsp; &nbsp; 6 
Model:&nbsp; &nbsp; SCC 1206

Luminous 1206 Solar Charge Controller

Luminous NXT+ 7.5 KVA/96V Solar PCU

Luminous Nxi Grid Tie Inverter are power inverter that can feed power from solar panels directly to grid. They are designed to quickly disconnect from the grid if the utility grid goes down (anti-islanding).

More than 97% efficiency

The transformer-less design makes Luminous GTI highly efficient to deliver maximum Solar Power.

Dual MPPT/Quad MPPT

Inbuilt MPPT charge controller extracts upto 30% more power from the panels. Dual/Quad MPPTs provides you the flexibility of connecting multiple arrays, which helps minimize the impact of shading, increases efficiency, resulting in more solar generation.

IP65 Protection

Luminous GTI is IP 65 certified product hence it is suitable for outdoor Installation also. It can work in extreme weather conditions such as dust, heavy rains, excessive heat or extreme cold.

Anti-Islanding protection

This does not send electricity to grid if Grid has failed, thereby ensures complete safety of line workers.

Wi-Fi and Remote Monitoring

Users can connect with Luminous GTI using Wi-Fi and access information and diagnostics via smartphone.

MNRE &amp; IEC compliance

GTI complies with all the National &amp; International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068, IEC - 61000, IEC - 61727, IEC - 62116

Luminous NXI 312-12kW Three Phase On-Grid Inverter

Luminous Shine 2420 Solar Charge Controller

Luminous 25 kw grid on-grid inverters are powerful inverters that converts direct current (DC) electricity into alternating current (AC), It is also called On grid system which works without battery.The Main purpose of Grid tied inverter is to supply power from Mains supply to home/offices and feed the Generation of solar Power to Mains supply&nbsp;&nbsp;

Luminous NXI 325 (25kW) Three Phase On-Grid Inverter

Luminous Grid Tied Inverters are powerful inverters that converts direct current (DC) electricity into alternating current (AC), It is also called On grid system which works without battery.The Main purpose of Grid tied inverter is to supply power from Mains supply to home/offices and feed the Generation of solar Power to Mains supply&nbsp;&nbsp;Grid Tie Inverters are designed to quickly disconnect from the grid if the utility grid goes down. It ensures that in the event of a blackout, the grid tie inverter will shutdown to prevent the energy it transfers from harming any line workers who are sent to fix the power grid.&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td>Model Name</td><td>NXI 150</td></tr><tr><td>System Rating</td><td>5 Kw, Single Phase</td></tr><tr><td>Maximum Solar Panel Connection (Watts)</td><td>5000&nbsp;Watts</td></tr><tr><td>Efficiency</td><td>96.80%</td></tr><tr><td>Feed in Phase</td><td>Single phase</td></tr><tr><td>Topology</td><td>Transformer less</td></tr><tr><td>Number of MPPT Controller</td><td>One</td></tr><tr><td>Noise</td><td>&lt; 30dBA</td></tr><tr><td>Weight (kg)</td><td>9.8 Kg</td></tr><tr><td>Dimensions [H *W *D]</td><td>339 * 565 * 172</td></tr></tbody></table></figure>

Luminous NXI 150-5KW Single Phase On-Grid Inverter

Luminous Grid Tied Inverters are powerful inverters that converts direct current (DC) electricity into alternating current (AC), It is also called On grid system which works without battery.The Main purpose of Grid tied inverter is to supply power from Mains supply to home/offices and feed the Generation of solar Power to Mains supply&nbsp;&nbsp;

Grid Tie Inverters are designed to quickly disconnect from the grid if the utility grid goes down. It ensures that in the event of a blackout, the grid tie inverter will shutdown to prevent the energy it transfers from harming any line workers who are sent to fix the power grid.&nbsp;

Luminous NXI 306-6kW Three Phase On-Grid Inverter

Luminous NXI 120-2KW Single Phase On-Grid Inverter

Luminous NXI 315 (15kW) Three Phase On-Grid Inverter

Luminous Shine 9650 Solar Charge Controller

Luminous NXI 140-4KW Single Phase On-Grid Inverter

<ul>
	<li>Rated AC power: 400VA, 12V</li>
	<li>Operating Voltage 100-290V</li>
	<li>Max supported panel power: 12V upto 400 Wp</li>
	<li>Charge Controller Rating - 20 Amp/12V, with 98% efficiency for fast charging</li>
	<li>Supports single battery</li>
	<li>24 Month Warranty</li>
	<li>Sine wave Solar hybrid UPS with 80% efficiency</li>
	<li>Savings of 25-30% on electricity bills by reducing charging time with the help of Intelligent Logic Control</li>
	<li>Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT).</li>
	<li>Fast battery charging through i-Charge Technology, on grid power, if case of long power cuts</li>
	<li>Sine wave output for safety of your sensitive appliances and noiseless operations.</li>
	<li>Battery charging commences from 110 Volt which makes it suitable for both urban and rural areas</li>
	<li>Supports ECO Mode &amp; UPS mode</li>
	<li>Extensive Safety and Protection through built in features for monitoring the health of your batteries and protects them against deep discharge, overcharge and short-circuit. The Main fuse for protection against excessive current thereby ensuring safety of your sensitive appliances.</li>
	<li>Battery type selector to configure charging currents as per connected battery.</li>
</ul>

Luminous NXG +750 (400VA/12V) Hybrid Solar  UPS

Luminous NXT+ 2.5 KVA/48V Solar PCU

<ul>
	<li>Rated AC power: 700VA, 12V</li>
	<li>Operating Voltage 100-290V</li>
	<li>Max supported panel power: 12V upto 800 Wp</li>
	<li>Charge Controller Rating - 40 Amp/12V, with 98% efficiency for fast charging</li>
	<li>Supports single battery</li>
	<li>24 Month Warranty</li>
	<li>Sine wave Solar hybrid UPS with 80% efficiency</li>
	<li>Savings of 25-30% on electricity bills by reducing charging time with the help of Intelligent Logic Control</li>
	<li>Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT).</li>
	<li>Fast battery charging through i-Charge Technology, on grid power, if case of long power cuts</li>
	<li>Sine wave output for safety of your sensitive appliances and noiseless operations.</li>
	<li>Battery charging commences from 110 Volt which makes it suitable for both urban and rural areas</li>
	<li>Supports ECO Mode &amp; UPS mode</li>
	<li>Extensive Safety and Protection through built in features for monitoring the health of your batteries and protects them against deep discharge, overcharge and short-circuit. The Main fuse for protection against excessive current thereby ensuring safety of your sensitive appliances.</li>
	<li>Battery type selector to configure charging currents as per connected battery.</li>
</ul>